Topic:235x75 Cooper H/Ts on stock Jeep Cherokee
Want to register?
Who Can Post? Any registered users may post a reply.
About Registration You must be registered in order to post a topic or reply in this forum.
Your UserName:
Your Password:   Forget your password?
Message Icon:                                           
Your Reply:

*UBB Code is ON

Smilies Legend

Disable Smilies in This Post.
Show Signature: include your profile signature. Only registered users may have signatures.

If you have previously registered, but forgotten your password, click here.

*If HTML and/or UBB Code are enabled, this means you can use HTML and/or UBB Code in your message.

T O P I C     R E V I E W
hypercubicJust bought an '01 Cherokee Sport 4x4. It has been fitted with Cooper H/Ts on the stock steel wheels. Standard fitment should have been 225x75. The vehicle's power steering in far too light, and it tends to oversteer on heavy lock. Are the 235s OK? If they are, what should the pressure be? Would the pressure be reduced from the normal 33psi? The Cherokee has done 56,000 miles and seems in very good overall condition.

Contact Us | AutoPedia® - The Automotive Encyclopedia

Copyright ©1995-2014 by AUTOPEDIA®, all rights reserved. AUTOPEDIA®, AUTO411™, CAR-IQ™, DEALERPEDIA™, UNILOT™, SIMULSEARCH™ and INTERQUOTE-RFP™ are trademarks of AUTOPEDIA. All other trademarks, tradenames and/or service marks are the property of their respective holders.

Powered by: Ultimate Bulletin Board (UltimateBB), Version 5.41
© Infopop Corporation (formerly Madrona Park, Inc.), 1998-1999.