Topic:sections widths
Want to register?
Who Can Post? Any registered users may post a reply.
About Registration You must be registered in order to post a topic or reply in this forum.
Your UserName:
Your Password:   Forget your password?
Message Icon:                                           
Your Reply:

*UBB Code is ON

Smilies Legend

Disable Smilies in This Post.
Show Signature: include your profile signature. Only registered users may have signatures.

If you have previously registered, but forgotten your password, click here.

*If HTML and/or UBB Code are enabled, this means you can use HTML and/or UBB Code in your message.

T O P I C     R E V I E W
stymiedI tend to think I know a little bit about tires, but what I dont get is how companies base their section widths. For instance I'm looking at the super swamper TSL's. Size is 13/33 r16. That means the section width should be approximately 13 inches, give or take a wee bit on rim width correct? I looked at specs on the tire and it gave a measuring rim width of 16 X 10, and the width is only 12.3! A whole 3/4 of an inch differance. Why would they call it a 33 X 13, if the width doesnt even measure out to be a 33 X 12 1/2, for the love of Pete.

Contact Us | AutoPedia® - The Automotive Encyclopedia

Copyright ©1995-2014 by AUTOPEDIA®, all rights reserved. AUTOPEDIA®, AUTO411™, CAR-IQ™, DEALERPEDIA™, UNILOT™, SIMULSEARCH™ and INTERQUOTE-RFP™ are trademarks of AUTOPEDIA. All other trademarks, tradenames and/or service marks are the property of their respective holders.

Powered by: Ultimate Bulletin Board (UltimateBB), Version 5.41
© Infopop Corporation (formerly Madrona Park, Inc.), 1998-1999.